Features
Fully computer controlled MOSFET switching with Active Braking Full over current, voltage, and temperature monitoring and protection Normal, 3-round burst, and Semi Only Operation. Automation 3-round burst to full auto operation after trigger is held .04 secondS Full PWM motor speed control (Ability to Decrease ROF and Increase to 100% Soft Start to reduce motor and drive train wear Very low trigger switch current (~10mA) Self diagnostics at power-up and during operation. Mode, Burst time and Motor Speed are programmed via trigger pulls Low sound level motor "vibration" is used to signal the user Fits in present fuse holder space and replaces old fuse with high speed electronic monitoring Gearbox wires included T connectors, Angled motor plugs and shrink wrap included
Technical Details
Size: 50.8mm x 16.5mm x 13.5mm. 14grams (will fit in a 19mm diameter tube)
Voltage Range: Accepts from 7.0v to 18.0v
Power: Rated for 500amps peak, 60amps continuous. It can deliver 7000 watts of power.
Low Battery Warning: Low Battery signal happens when battery drops to 85% of the initial voltage. Shutdown will occur when the battery voltage is either under 7.0V or drops below 80% capacity. Strongly recommended for use with Li-Poly batteries.
Expert Use only
There are currently no recommend items for this product.
There are currently no frequently asked questions for this product.
Ask a question about this product |
|
|
Thank you for submitting your question!
Please allow up to 48 business hours for a response.
Details
